Fluke 113 Digital Multimeter
Specifications
| Brand: | Fluke |
|---|---|
| Model Number: | Fluke-113 |
| Display Type: | Digital display |
| DC Voltage: | 600 V |
| Operating Mode: | Manual Range |
| Operating Temperature: | 0 – 50 ℃ |
| Measuring Capacitance Range: | None |
| DIY Supplies: | Electrical |
| DC Current: | Refer to SPEC |
| Color: | Yellow |
| Certification: | CE |
৳ 16,000.00 ৳ 17,500.00
| Specifications | ||
| VCHEK1 2 3 | Range | 6.000 V / 60.00 V / 600.0 V |
| Resolution | 0.001 V / 0.01 V/ 0.1 V | |
| Accuracy | DC, 45 to 500 Hz: 2.0% + 3 500 Hz to 1 kHz: 4.0% + 3 |
|
| Diode test4 | Range | 2.000 V |
| Resolution | 0.001 V | |
| Accuracy | 2.0% + 3 | |
| Continuity4 | Accuracy | Beeper on < 20 Ω, off > 250 Ω detects opens or shorts of 500 μs or longer |
| Ω4 | Range | 600.0 Ω / 6.000 kΩ / 60.00 kΩ |
| Resolution | 0.1 Ω / 0.001 kΩ / 0.01 kΩ | |
| Accuracy | 0.9% + 2 / 0.9% + 1 / 0.9% + 1 | |
| Capacitance4 | Range | 1000 nF / 10.00 μF / 100.0 μF / 9999 μF |
| Resolution | 1 nF / 0.01 μF / 0.1 μF / 1 μF | |
| Accuracy | 1.9% + 2 100 μF – 1000 μF: 1.9% + 2 1000 μF: 5% + 20 |
|
| Specifications | ||
| Maximum voltage between any terminal and earth ground | 600 V | |
| Display | 3 3/4-digits, 6000 counts, updates 4/sec | |
| Operating temperature | -10°C to 50°C (14°F to 122°F) | |
| Storage temperature | -40°C to 60°C (-22°F to 140°F) | |
| Temperature coefficient | 0.1 x (specified accuracy) / °C (< 18°C or > 28°C) | |
| Operating altitude | 2,000 m | |
| Storage altitude | 10,000 m | |
| Relative humidity | 95% to 30°C 75% to 40°C 45% to 50°C |
|
| Battery type | 9 Volt Alkaline, IEC 6F22 | |
| Battery life | Alkaline: 300 hours typical, without backlight | |
| Size (H x W x L) | 167.1 x 85.1 x 46.0 mm (6.58 x 3.35 x 1.81 in) | |
| Weight | 13.0 oz (404 g) | |
| Safety | IEC 61010-1: Pollution Degree 2 IEC 61010-2-033: CAT IV 600V |
|
| EMI regulations | Complies with FCC Part 15, Class B | |
| Specifications | ||
| VCHEK | Input impedance (nominal) | ~3 kΩ < 300 pF |
| VCHEK | Common mode rejection ratio (1 kΩ unbalanced) |
> 60 dB at DC, 50 or 60 Hz |
| Ω | Open circuit test voltage | < 2.7 VDC |
| Full scale voltage | < 0.7 VDC | |
| Diode test | Open circuit test voltage | 2.7 VDC |
| Full scale voltage | 2.000 VDC | |
| Ω | Short circuit current | < 350 μA |
| Diode test | Short circuit current | < 1.0 mA |
Based on 0 reviews
Be the first to review “Fluke 113 Digital Multimeter”
Related products
-
Best Selling Products, Meters, Multi Gas Detector
Multi Gas Detector Meter ST8900 Smart Sensor
ST8900 Four-in-one gas detector
Product introduction:
This instrument is a portable multi-gas detector, which can continuously detect 4 kinds of gases at the same time: O2, LEL (combustible gas), CO, H2S. Each gas concentration reading is displayed on the LCD. The instrument allows users to set low-concentration/high-concentration alarm setting values, and STEL/TWA alarm function. When the detection result exceeds the preset alarm setting value, the instrument will alert the user with sound, light and vibration alarm.
SKU: n/a -
AC/DC Clamp Meter, Best Selling Products, Clamp meter, Digital Clamp Meters, Meters
UT203+ Digital Clamp Meter
AC/DC Clamp Meter, Best Selling Products, Clamp meter, Digital Clamp Meters, MetersUT203+ Digital Clamp Meter
UT200+ Series 400A/600A Digital Clamp Meters
UT200+ series digital clamp meters are designed according to EN61010-2010 CAT II 600V/CAT III 300V, featuring overload protection, high reliability, high safety and high accuracy. These meters can be used to measure high-voltage frequency, temperature, AC/DC current, etc.
Models in UT200+ Series: UT203+
Features of UT200+ Series 400A/600A Digital Clamp Meters
● True RMS● LCD backlight
● Large screen and display digits
● Neutral/live wire test
SKU: n/a
There are no reviews yet.