Tester
Tester
Showing 1–24 of 45 results
-
Digital or Analogue Insulation/ Continuity Testers
Analogue Insulation / Continuity Testers , MODEL 3131A
Digital or Analogue Insulation/ Continuity TestersAnalogue Insulation / Continuity Testers , MODEL 3131A
The Model 3131A offers unmatched performance, and feature including test lead resistance zero adjustments for time-saving continuous operation, a clear ease to read illuminated scale, and a live circuit warning.
• Test insulation up to 100MΩ at 250V, 200MΩ at 500V, 400MΩ at 1000V and continuity up to 20Ω.
• LIVE circuit warning lamp plus an audible warning.
• Automatic discharge of circuit capacitance when the TEST button is released.
• Fuse protected (continuity range only).
• Battery check LED.
• Front panel zero adjust.
• Backlight function to facilitate working at dimly lit situations.
• PRESS TO TEST button with lockdown feature.SKU: n/a -
Earth Testers
Earth Clamp Testers MODEL 4200
• The earth resistance from 0.05 to 1500Ω can be measured without the auxiliary earth spikes.
(The Multiple Earthing System.)
• True RMS
Accurate true RMS readings of AC current including distorted waveform from 1mA to 30.0A
• Noise Check Function
A function to detect current, which effects on an earth resistance measurement and display “NOISE” mark on the LCD.
• Memory function
Save and display up to 100 measurement data.
• Data hold function / Buzzer function / Back light function
• Compliant with Safety Standards of IEC 61010-1 : CAT IV 300V Pollution degree2Note:
A single earthing can not be measured. (Only for Multiple Earthing System)SKU: n/a -
Earth Testers
Earth Resistance & Resistivity Tester ,KEW 4106
Earth Resistance & Resistivity Tester
• High test current up to 80mA yielding resolution of 0.001Ω on 2Ω range.
• Advanced Filtering method (based on FFT Fast Fourier Transform) reduces noise interference for obtaining stable measurements.
• Automatic and Manual selection of the Test Current Frequency in four bands (94/105/111/128Hz). In Automatic mode, KEW 4106 will select the most suitable Frequency.
• Several sub-results can be shown on the display: Resistance of the Auxiliary Earth Spikes, Frequency of Test Current, Voltage and Frequency of Interference (noise), Residual Resistance Rk, etc.
• Warning for excessive noise and high Auxiliary Earth Spikes resistance.
• Large Graphic Display with backlight for readings in poorly illuminated areas.
• Up to 800 measurement results can be saved in the memory and recalled on the display.
• The stored results can be transferred to a PC using the “KEW Report” software and a USB adaptor (Model 8212-USB) which are included.
• Robust design with IP54 protection.SKU: n/a -
Digital or Analogue Insulation/ Continuity Testers, Earth Resistance Tester, Meters
High Voltage Insulation Testers KYORITSU KEW 3125A
Digital or Analogue Insulation/ Continuity Testers, Earth Resistance Tester, MetersHigh Voltage Insulation Testers KYORITSU KEW 3125A
• Insulation Resistance up to 1TΩ
• Short-Circuit Current up to 1.5mA
• Wide Test Voltage from 250V to 5000V
• Diagnosis Function of PI and DAR
• Newly-designed alligator clip
• It comes with a tough hard case
• Filter function reduces noise interference for obtaining stable measurement
• Large display with Bar Graph indication and backlight
• Live voltage warning
• Safety standard IEC 61010-1 CAT IV 300V / CAT III 600VSKU: n/a -
Loop/PSC Testers
LOOP/PFC/PSC Testers MODEL 4118A
• Custom microprocessor controlled for highest accuracy and reliability.
• 3 LEDs for checking correct wiring status.
• 15mA LOOP measurement:
LOOP impedance 2000Ω range measurement is carried out with low test current (15mA).
The current will not cause tripping out involved RCD even the one with the lowest nominal differential current (30mA).
• Direct reading of Prospective Short Circuit Current (PSC).
• Safe voltage measurement function.
• Large custom digital display readout on all models.
• Measure low loop resistances(resolution of 0.01Ω)
• Automatic lock-out if test resister overheats.
• Large custom digital display readout .
• Visual indication of reversed phase and neutral wiring at socket.
• Designed to IP54 Rating
• Complies with IEC 61557SKU: n/a -
Tester
MS2308 – Advanced Earth Resistance Tester
With the latest technology in a small-sized, robust and easy-to-use instrument, this series of earthing resistance tester is mainly used to test the earthing resistance of transformer, lightning-proof system, high-voltage power tower and telecommunication equipments, etc., providing a perfect solution for earthing-resistance test.
Features:
● Digital / Analog dual display 9999 counts
● Auto Power Off
● Clock
● AVG
● Compensation Resistance
● Alarming indicator for limit-value measurement
● Battery capacity indicator
● Display Backlight
● The setting length between resistivity testing point
● Data Storage 100 groups
● USB 2.0 InterfaceSKU: n/a -
Tester
MS2309 – Low Resistance Tester
This meter is designed for many situations, such as power distribution lines, interior grounding wires, transformer resistance testing, with 2 or 4 wire resistance measurement modes and AC voltage measurement.The meter has a large, easy to read, backlit LCD screen with the ability to store up to 1000 sets of data.The meter’s save data persists after turning off the meter, so data from previous uses can easily be recalled and used for comparison or relative measurement.
Features:
● Display 40000 counts
● Auto Ranging
● Auto Power Off
● Measurement Rate 2 times/sec
● Data storage 1000 groups
● Clock
● Real-Time Data Upload
● Input Protection
● Short-Circuit Current >200mA
● Data Compare
● Data Hold
● Backlight
● USB Interface
● Low Battery DisplaySKU: n/a -
Tester
MS5911 – Safety PAT Tester
Safety Pat Plus is a handheld battery-powered unit suitable for carrying out electrical safety tests. Stores 300 test results and can be battery & mains powered. The instrument is capable of testing surge protected equipment & can test 110V, 230V appliances. It will return true leakage results at both 110V and 230V
Features:
● Auto power off
● Data Logging 300 groups
● Safety CLASS I
– Grounding / Insulation resistance / Leakage current
● Safety CLASS II
– Insulation resistance / Leakage current
● Cord test
– Grounding / Insulation resistance / Leakage current
● Polarity test
● Power socket test AC 110V/230V ±15%
● Low battery detection
● Backlight● MS5911A – USA type
● MS5911D – EU typeSKU: n/a -
Tester
MS6300 – Multi-Functions Environment Tester
This meter is Digital Multifunction Environment Meter which combined the function of Sound Level, Luminometer, Relative Humidity Meter, Temperature Meter, and Anemometer.
Features:
● Auto & Manual Ranging
● Auto Power Off
● Area range 0~999.9m², 0~999.9ft²
● AVG / MAX / MIN / DIF (MAX-MIN)
● A / C Weighting Indication
● Data Hold
● Display Backlight
● Low Battery DisplaySKU: 34000 -
Tester
MS6310 – Combustible GAS Detector
High sensitivity combustible gas detector. Quickly identifies and pinpoints gas leaks. One-hand operation and manual regulate sensitivity to eliminate background gas levels.
Features:
● Easy to Identify and Pinpoint Gas Leaks
● Portable and High Sensitivity
● Resume Original Measurement State after 7~10 minutes in Clear Air
● Gas Detected: Natural gas, Methane, Ethane, Propane, Butane, Acetone, Alcohol, Ammonia,
Steam, Carbon Monoxide, Gasoline, Jet Fuel, Hydrogen Solvents, Lacquer thinner, NaphthaSKU: n/a -
Tester
MS6811 – Network Cable Tester
The network cable tester is a small hand-held cable tester, which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cables.
Features:
● Test device used with UTP (Unshield Twisted Pair) and STP (Shield Twisted Pair) wiring.
● Checks continuity and configuration of wiring with unshielded and shielded modular plugs.
● Tests for open circuits, shorts, miswires, reversals, and split pairs.
● Main unit and one remote allow one person to test T568A, T568B, 10Base-T, and Token Ring.
● DEBUG quickly identifies which cable pairs have a specific wiring fault.
● Battery low indicator.SKU: n/a -
Tester
MS6812 – Cable Tracker
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
Features:
● Sound and Light Instruction
● Cont and Tone LED LightApplications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a -
Tester
MS6813 – Multi-Function Cable Tracker
MS6813 is s held network cable tester, ideal for Coaxial Cable (BNC), UTP and STP Cable installation, measurement, maintenance or inspection. it also offers a fast and convenient way of testing telephone line modes greatly simplifies telephone line installation and maintenance
Application and Features
● Testing Coaxial Cable (BNC)
● Twisted-wire-pair cables (RJ45): 10Base-T, T568A, T568B, Token Ring
● Testing Cable’s Shield Integrity
● Judge Continuity of the Cables or Wires
● Track the cables or wires, and diagnose the break Point
● Receive the tone signal on the cables or wires(telephone line)
● Identify the state in the working telephone line(clear, ringing, busy)
● Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a -
Tester
MS6818 – Advanced Wire Tracker
The MASTECH MS6818 Underground Wire Cable Metal Pipe Locator Detector Tester consists of a signal transmitter and a receiver, widely used in the construction and maintenance of communication cables, power cables, metal pipes, and much more. Current and voltage conducting cables, electrical circuits, conduits, water and heating pipelines, fuses, switches can all be located. Short circuits and interruptions of assorted lines and cables can be detected. Even better, the detection is possible not only underground but also in walls and concrete.
Applications and Feature :
● Find the Beaks or Shorts in Cable in the wall or Earth
● Track Cables in the wall or Earth
● Find the Fuse and Safeguard
● Find the Beaks or Shorts in Conduit under the Floor
● Track a Metal Conduit in the Project of ware or hot
● Sensitivity of Receiver can be selected
● Auto Ranging,
● Auto Power Off
● Backlight and WorklightSKU: n/a -
Tester
MS6860 (Model B/C/D/E) – Socket Tester
The professional Socket Tester.The easy way to find out if your sockets are safe! Reliable and easy to use Modern, ergonomic design with unique soft finger grip Compact, durable-designed to Safety Standard EN61010. LEDs indicate a range of wiring condition including: Correct,Missing EarthLive / Earth ReverseLive / Neutral Reverse / Missing Neutral
SKU: n/a -
Tester
MS6900 – Moisture Tester
Professional Mini Digital Moisture Meter.It is a multifunctional detector that it is available to measure Wood Timber’s Moisture, Humidity & Temperature. Typically, via this device, the technician can measure timber, Construction Material’s Moisture, Humidity & Temperature.
Features:
● Depth 0~50mm
● MAX / MIN
● Sampling Rate 240ms
● Unit Selection %, WB, TD, ℃, ℉, %RH
● Display Backlight
● Data Hold
● Auto Power Off
● Low Battery Display
● Materials Moisture Range :
1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
3: (0.9~24.5%) Smoothing Cement, Concrete
4: (0.0~12.2%) Anhydrite Screed
5: (0.7~9.2%) Cement Mortar
6: (0.5~11.1%) Lime Mortar, Plaster
7: (0.0~17.8%) BrickSKU: n/a -
Tester
MS8910 – Smart SMD Tester (R/C)
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has a continuity checking function.
Features:
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30ΩSKU: n/a
